|
|
|
National Stock Number:
5306-01-128-8940
Federal Supply Class:
5306
National Item Identification Number:
011288940
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 122895-7H59 | 80539 | SPS TECHNOLOGIES, LLC | | AIC687-7H59 | 06725 | SPS TECHNOLOGIES, LLC | | S406-7H59 | 17446 | HUCK INTERNATIONAL, INC | | PBF1265-7H59 | 27624 | SPS TECHNOLOGIES LLC | | MB154-7H59 | 73197 | HI-SHEAR CORPORATION | | MB154-7H59 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC | | VCG0001-7H59 | 06710 | VALLEY-TODECO, INC. | | ST3M744-7H59 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | ST3M744-7H59 | 76301 | THE BOEING COMPANY | | VS3174-7H59 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | S406-7H59 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| FASTENER LENGTH | 4.130 INCHES MINIMUM AND 4.150 INCHES MAXIMUM | | GRIP DIAMETER | 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM | | GRIP LENGTH | 3.678 INCHES MINIMUM AND 3.698 INCHES MAXIMUM | | HEAD HEIGHT | 0.247 INCHES MINIMUM AND 0.267 INCHES MAXIMUM | | HEAD MINOR DIAMETER | 0.711 INCHES MINIMUM AND 0.717 INCHES MAXIMUM | | HEAD STYLE | SPLINE DRIVE SHEAR HEAD | | HOLE CONFIGURATION STYLE | SPLINE | | HOLE DIAMETER | 0.065 INCHES MINIMUM AND 0.075 INCHES MAXIMUM | | HOLE QUANTITY | 1 | | HOLE TYPE | DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP XM-13 OVERALL | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.438 INCHES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.432 INCHES MINIMUM AND 0.472 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 20 |
|
|