5306-01-131-2891 BOLT,SHOULDER Index 5306-01-131-2893 BOLT,SHOULDER

National Stock Number:
5306-01-131-2892

Federal Supply Class:
5306

National Item Identification Number:
011312892

Description:
BOLT,SHOULDER

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No. 10 (0.190 IN.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than No. 10 (0.190 IN.) (5 mm) and those items with an inserted drive head, use SCREW, SHOULDER. For items which are No. 10 (0.190 IN.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use BOLT, EXTERNALLY RELIEVED BODY. Excludes THUMBSCREW.


Manufacturer Information:
10115837A486GNIMIKKEISTOKESKUS NCB FINLAND
11887-4D4859563REID PRODUCTS INC.
NS122565-4D480PTK6SPS TECHNOLOGIES INC
3M932-4D4876301THE BOEING COMPANY
NS122565-4D4880539SPS TECHNOLOGIES, LLC
NS122565-4D48K5673SPS TECHNOLOGIES LTD TJ BROOKS DIVISION
SC2673-4D4806950HOWMET GLOBAL FASTENING SYSTEMS INC
VS3249-4D4806950HOWMET GLOBAL FASTENING SYSTEMS INC
VS3249-4D4892215HOWMET GLOBAL FASTENING SYSTEMS INC


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER3.222 INCHES MINIMUM AND 3.272 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH3.346 INCHES MINIMUM AND 3.376 INCHES MAXIMUM
HEAD HEIGHT0.141 INCHES MINIMUM AND 0.171 INCHES MAXIMUM
HEAD STYLEDISHED HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP XM-13 OVERALL
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SHOULDER DIAMETER0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH2.990 INCHES MINIMUM AND 3.010 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPEROUND FIRST SHOULDER
WIDTH BETWEEN FLATS0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS3A
THREAD LENGTH0.335 INCHES MINIMUM AND 0.361 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNJF
THREAD QUANTITY PER INCH28


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us