|
|
|
National Stock Number:
5306-01-132-1061
Federal Supply Class:
5306
National Item Identification Number:
011321061
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 10115879 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 122895-10D 32 | 0PTK6 | SPS TECHNOLOGIES INC | | AIC687-10D32 | 06725 | SPS TECHNOLOGIES, LLC | | GS1015-10D32 | 1EM77 | B & B SPECIALTIES INC | | MB154-10D32 | 73197 | HI-SHEAR CORPORATION | | 122895-10D32 | 80539 | SPS TECHNOLOGIES, LLC | | ST3M744-10D32 | 06710 | VALLEY-TODECO, INC. | | ST3M744-10D32 | 06725 | SPS TECHNOLOGIES, LLC | | ST3M744-10D32 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | ST3M744-10D32 | 0ZC92 | HEARTLAND PRECISION FASTENERS INC | | ST3M744-10D32 | 27624 | SPS TECHNOLOGIES LLC | | PBF1265-10D32 | 27624 | SPS TECHNOLOGIES LLC | | ST3M744-10D32 | 58998 | FASTENER INNOVATION TECHNOLOGY, INC. | | S406-10D32 | 97928 | HUCK INTL INC | | VCG0001-10D32 | 06710 | VALLEY-TODECO, INC. | | ST3M744-10D32 | 76301 | THE BOEING COMPANY | | ST3M744-10D32 | 80539 | SPS TECHNOLOGIES, LLC | | VS3174-10D32 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 2.408 INCHES MINIMUM AND 2.438 INCHES MAXIMUM ALL HOLES | | FASTENER LENGTH | 2.533 INCHES MINIMUM AND 2.553 INCHES MAXIMUM | | GRIP DIAMETER | 0.6235 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM | | GRIP LENGTH | 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM | | HEAD HEIGHT | 0.350 INCHES NOMINAL | | HEAD STYLE | SPLINE DRIVE SHEAR HEAD | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP XM-13 OVERALL | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.625 INCHES | | WIDTH BETWEEN FLATS | 0.970 INCHES MINIMUM AND 0.978 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.523 INCHES MINIMUM AND 0.563 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 18 |
|
|