|
|
|
National Stock Number:
5306-01-132-2174
Federal Supply Class:
5306
National Item Identification Number:
011322174
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 10115881 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | AS297-12T30 | 84256 | AVIBANK MFG., INC. | | LB46-12-30 | 73197 | HI-SHEAR CORPORATION | | LB52-12-30 | 73197 | HI-SHEAR CORPORATION | | LB52T12-30 | 73197 | HI-SHEAR CORPORATION | | LB52T12-30 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC | | ST3M833V12-30 | 76301 | THE BOEING COMPANY | | ST3M833V12T30 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 2.319 INCHES NOMINAL FIRST HOLE | | FASTENER LENGTH | 2.979 INCHES NOMINAL | | GRIP DIAMETER | 0.7485 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM | | GRIP LENGTH | 1.875 INCHES MAXIMUM | | HEAD HEIGHT | 0.351 INCHES NOMINAL | | HEAD STYLE | HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | NAS 621 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | TITANIUM ALLOY OVERALL | | NOMINAL THREAD DIAMETER | 0.750 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE | | SPECIAL FEATURES | HOLES DRILLED NINETY DEGREES APART,PLUNGER IN THREAD END WITH SELF RETAINING ELEMENT | | WIDTH BETWEEN FLATS | 1.052 INCHES MINIMUM AND 1.062 INCHES MAXIMUM | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 1.104 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 16 |
|
|