5306-01-133-3867, BOLT,SHEAR

National Stock Number:
5306-01-133-3867

Federal Supply Class:
5306

National Item Identification Number:
011333867

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

79894D3-6	56878	SPS TECHNOLOGIES, LLC
AIC558-3D6	06725	SPS TECHNOLOGIES, LLC
H408F3D6	17446	HUCK INTERNATIONAL, INC
GB511EB3D6	26512	NORTHROP GRUMMAN SYSTEMS CORPORATION
PBF1290-3D6	27624	SPS TECHNOLOGIES LLC
H408F3D6	97928	HUCK INTL INC
VCD0004-3-6FS	06710	VALLEY-TODECO, INC.
VS3244F-3D6	92215	HOWMET GLOBAL FASTENING SYSTEMS INC

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	0.506 INCHES MINIMUM AND 0.538 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	0.669 INCHES MINIMUM AND 0.716 INCHES MAXIMUM
GRIP DIAMETER	0.1885 INCHES MINIMUM AND 0.1894 INCHES MAXIMUM
GRIP LENGTH	0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HARDNESS RATING	46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
HEAD STYLE	DOUBLE HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATION	AMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP H11 OVERALL
MINIMUM TENSILE STRENGTH	220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.065 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE
WIDTH BETWEEN FLATS	0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	NAS672 ASSN STD 1ST TREATMENT RESPONSE OR MIL-C-8837 TY 2,CL 2 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OR CADMIUM AND CHROMATE OVERALL
THREAD DIRECTION	RIGHT-HAND
THREAD CLASS	3A
THREAD LENGTH	0.284 INCHES MINIMUM AND 0.351 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNJF
THREAD QUANTITY PER INCH	32

Click here to Register for Free 30-day Trial