|
|
|
National Stock Number:
5306-01-133-4846
Federal Supply Class:
5306
National Item Identification Number:
011334846
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| AIC515-4-11 | 06725 | SPS TECHNOLOGIES, LLC | | BM3315-4-11 | 17446 | HUCK INTERNATIONAL, INC | | GB511GF4-11 | 06710 | VALLEY-TODECO, INC. | | GB511GF4-11 | 06725 | SPS TECHNOLOGIES, LLC | | GB511GF4-11 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | BM3315-4-11 | 97928 | HUCK INTL INC | | H381-4-11 | 17446 | HUCK INTERNATIONAL, INC | | GB511W4-11 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | PBF1079-4-11 | 27624 | SPS TECHNOLOGIES LLC | | GB511GF4-11 | 27624 | SPS TECHNOLOGIES LLC | | GB511GF4-11 | 56878 | SPS TECHNOLOGIES, LLC | | LWB22D-4-11 | 56878 | SPS TECHNOLOGIES, LLC | | LWB22D-4-11 | 80539 | SPS TECHNOLOGIES, LLC | | H381-4-11 | 97928 | HUCK INTL INC | | VEP220121-4V11 | 06710 | VALLEY-TODECO, INC. | | VS3070F4-11 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| EXTENDED WASHER THICKNESS | 0.069 INCHES NOMINAL | | EXTENDED WASHER DIAMETER | 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM | | FASTENER LENGTH | 1.084 INCHES MINIMUM AND 1.114 INCHES MAXIMUM | | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | | GRIP LENGTH | 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM | | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL | | HEAD HEIGHT | 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM | | HEAD STYLE | DOUBLE HEXAGON W/HOLE | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP H11 OVERALL | | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | WIDTH BETWEEN FLATS | 0.304 INCHES MINIMUM AND 0.313 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS 672 ASSN STD 1ST TREATMENT RESPONSE OR MIL-C-8837 TYPE 2 CLASS 2 MIL SPEC 2ND TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OR CADMIUM AND CHROMATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.386 INCHES MINIMUM AND 0.436 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 28 |
|
|