|
|
|
National Stock Number:
5306-01-134-0199
Federal Supply Class:
5306
National Item Identification Number:
011340199
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 10115928 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 11823-8D32 | 59563 | REID PRODUCTS INC. | | AIC687-8D32 | 06725 | SPS TECHNOLOGIES, LLC | | GS1015-8D32 | 1EM77 | B & B SPECIALTIES INC | | 122895-8D32 | 56878 | SPS TECHNOLOGIES, LLC | | 122895-8D32 | 80539 | SPS TECHNOLOGIES, LLC | | ST3M744-8D32 | 0UCY9 | M.S. AEROSPACE INC. | | ST3M744-8D32 | 0ZC92 | HEARTLAND PRECISION FASTENERS INC | | SLB748-8D32 | 16258 | SPACE-LOK, INC. | | S406-8D32 | 17446 | HUCK INTERNATIONAL, INC | | ST3M744-8D32 | 1VSL7 | HOUSTON PRECISION FASTENERS I LP | | PBF1265-8D32 | 27624 | SPS TECHNOLOGIES LLC | | MB154-8D32 | 73197 | HI-SHEAR CORPORATION | | S406-8D32 | 97928 | HUCK INTL INC | | VCG0001-8D32 | 06710 | VALLEY-TODECO, INC. | | VS3174-8D32 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | VS3174-8D32 | 17446 | HUCK INTERNATIONAL, INC | | ST3M744-8D32 | 58998 | FASTENER INNOVATION TECHNOLOGY, INC. | | WC744-8D32 | 60516 | WEST COAST AEROSPACE, INC. | | ST3M744-8D32 | 76301 | THE BOEING COMPANY | | VS3174-8D32 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 2.318 INCHES MINIMUM AND 2.348 INCHES MAXIMUM ALL HOLES | | FASTENER LENGTH | 2.443 INCHES MINIMUM AND 2.463 INCHES MAXIMUM | | GRIP DIAMETER | 0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM | | GRIP LENGTH | 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM | | HEAD HEIGHT | 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM | | HEAD STYLE | SPLINE DRIVE SHEAR HEAD | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP XM-13 OVERALL | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.500 INCHES | | WIDTH BETWEEN FLATS | 0.774 INCHES MINIMUM AND 0.782 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.433 INCHES MINIMUM AND 0.473 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 20 |
|
|