|
|
|
National Stock Number:
5306-01-137-7282
Federal Supply Class:
5306
National Item Identification Number:
011377282
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 74597-M8125-10 | 56878 | SPS TECHNOLOGIES, LLC | | BACB30SX8-10 | 17943 | FEDERAL MANUFACTURING CORP | | BACB30SX8-10 | 81205 | THE BOEING COMPANY | | VS 3078-8-10 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| FASTENER LENGTH | 33.88 MILLIMETERS NOMINAL | | GRIP DIAMETER | 7.9850 MILLIMETERS MINIMUM AND 8.0000 MILLIMETERS MAXIMUM | | GRIP LENGTH | 15.875 MILLIMETERS NOMINAL | | HEAD HEIGHT | 5.35 MILLIMETERS MINIMUM AND 5.70 MILLIMETERS MAXIMUM | | HEAD STYLE | HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | IRON ALLOY 660 OVERALL | | MINIMUM TENSILE STRENGTH | 1100 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 8.0 MILLIMETERS | | WIDTH BETWEEN FLATS | 12.73 MILLIMETERS MINIMUM AND 13.00 MILLIMETERS MAXIMUM | | SURFACE FINISH | 0.8 MICROINCHES GRIP | | SURFACE FINISH | 3.2 MICROINCHES BEARING SURFACE OF HEAD | | SURFACE FINISH | 3.2 MICROINCHES HEAD | | SURFACE FINISH | 3.2 MICROINCHES THREADS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 18.0 MILLIMETERS NOMINAL | | THREAD PITCH IN MILLIMETERS | 1.25 | | THREAD SERIES DESIGNATOR | M |
|
|