|
|
|
National Stock Number:
5306-01-138-9552
Federal Supply Class:
5306
National Item Identification Number:
011389552
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 10115971 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | AS300-4-16 | 84256 | AVIBANK MFG., INC. | | LB36-4-16 | 73197 | HI-SHEAR CORPORATION | | ST3M764C4-16 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.391 INCHES NOMINAL FIRST HOLE | | FASTENER LENGTH | 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM | | GRIP DIAMETER | 0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM | | GRIP LENGTH | 1.000 INCHES MINIMUM AND 1.016 INCHES MAXIMUM | | HEAD HEIGHT | 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP XM-13 OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE | | SPECIAL FEATURES | RETAINING ELEMENT IN SHANK | | WIDTH BETWEEN FLATS | 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD | | SURFACE FINISH | 63.0 MICROINCHES GRIP | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.344 INCHES MINIMUM AND 0.395 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 28 | | THREAD SERIES DESIGNATOR | UNJF |
|
|