|
|
|
National Stock Number:
5306-01-140-7894
Federal Supply Class:
5306
National Item Identification Number:
011407894
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 1189227-10-12 | 05824 | AEROJET ROCKETDYNE INC | | 122411-10-12 | 80539 | SPS TECHNOLOGIES, LLC | | VS3240-10-12 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | PBF1284-10-12 | 27624 | SPS TECHNOLOGIES LLC | | VS3240-10-12 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | PBF 1284-10-12 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| EXTERNAL THREAD TOLERANCE CLASS | 4H | | FASTENER LENGTH | 33.50 MILLIMETERS MINIMUM AND 34.50 MILLIMETERS MAXIMUM | | GRIP DIAMETER | 9.9620 MILLIMETERS MINIMUM AND 9.9870 MILLIMETERS MAXIMUM | | GRIP LENGTH | 11.75 MILLIMETERS MINIMUM AND 12.25 MILLIMETERS MAXIMUM | | HEAD HEIGHT | 6.82 MILLIMETERS MINIMUM AND 7.13 MILLIMETERS MAXIMUM | | HEAD STYLE | HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5734 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | IRON ALLOY 660 OVERALL | | III PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | PROPRIETARY CHARACTERISTICS | PACS | | MINIMUM TENSILE STRENGTH | 140000 MEGAPASCALS | | NOMINAL THREAD DIAMETER | 10.0 MILLIMETERS | | WIDTH BETWEEN FLATS | 16.73 MILLIMETERS MINIMUM AND 17.00 MILLIMETERS MAXIMUM | | SURFACE FINISH | 0.8 MICROMETERS THREADS | | SURFACE FINISH | 0.8 MICROMETERS BEARING SURFACE OF HEAD | | SURFACE FINISH | 0.8 MICROMETERS GRIP | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 21.75 MILLIMETERS MINIMUM AND 22.25 MILLIMETERS MAXIMUM | | THREAD SERIES DESIGNATOR | M | | THREAD PITCH IN MILLIMETERS | 1.5 |
|
|