5306-01-142-0302 BOLT,SHOULDER Index 5305-01-142-0304 SETSCREW

National Stock Number:
5306-01-142-0303

Federal Supply Class:
5306

National Item Identification Number:
011420303

Description:
BOLT,SHOULDER

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No. 10 (0.190 IN.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than No. 10 (0.190 IN.) (5 mm) and those items with an inserted drive head, use SCREW, SHOULDER. For items which are No. 10 (0.190 IN.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use BOLT, EXTERNALLY RELIEVED BODY. Excludes THUMBSCREW.


Manufacturer Information:
122914-4D1380539SPS TECHNOLOGIES, LLC
MB159-4D1373197HI-SHEAR CORPORATION
PBF1269-4D1327624SPS TECHNOLOGIES LLC
ST3M837-4D1356878SPS TECHNOLOGIES, LLC
ST3M837-4D1376301THE BOEING COMPANY
MB159-4D13L4528LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC
VS3191-4D13X06950HOWMET GLOBAL FASTENING SYSTEMS INC
VS3191-4D13X92215HOWMET GLOBAL FASTENING SYSTEMS INC
ST3M837-4D1392215HOWMET GLOBAL FASTENING SYSTEMS INC


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER1.072 INCHES MINIMUM AND 1.129 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH1.193 INCHES MINIMUM AND 1.240 INCHES MAXIMUM
HEAD HEIGHT0.154 INCHES MINIMUM AND 0.174 INCHES MAXIMUM
HEAD MINOR DIAMETER0.448 INCHES MINIMUM AND 0.455 INCHES MAXIMUM
HEAD STYLESPLINE DRIVE SHEAR HEAD
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP XM-13 OVERALL
NOMINAL THREAD DIAMETER0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE
SHOULDER DIAMETER0.2646 INCHES MINIMUM AND 0.2651 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPEROUND FIRST SHOULDER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.371 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNJF
THREAD QUANTITY PER INCH28


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us