5306-01-142-9360 BOLT,SHOULDER Index 5306-01-142-9362 BOLT,SHOULDER

National Stock Number:
5306-01-142-9361

Federal Supply Class:
5306

National Item Identification Number:
011429361

Description:
BOLT,SHOULDER

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No. 10 (0.190 IN.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than No. 10 (0.190 IN.) (5 mm) and those items with an inserted drive head, use SCREW, SHOULDER. For items which are No. 10 (0.190 IN.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use BOLT, EXTERNALLY RELIEVED BODY. Excludes THUMBSCREW.


Manufacturer Information:
122916-4D1080539SPS TECHNOLOGIES, LLC
MB162-4D1073197HI-SHEAR CORPORATION
ST3M840-4D1076301THE BOEING COMPANY
VS3190-4D10Y92215HOWMET GLOBAL FASTENING SYSTEMS INC
MB162-4D10L4528LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER0.886 INCHES MINIMUM AND 0.926 INCHES MAXIMUM FIRST HOLE
EXTENDED WASHER DIAMETER0.460 INCHES MINIMUM AND 0.470 INCHES MAXIMUM
EXTENDED WASHER THICKNESS0.026 INCHES MINIMUM AND 0.046 INCHES MAXIMUM
FASTENER LENGTH1.078 INCHES MINIMUM AND 1.108 INCHES MAXIMUM
HEAD HEIGHT0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD STYLESPLINE EXTENDED WASHER
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP XM-13 OVERALL
MINIMUM TENSILE STRENGTH220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE
SHOULDER DIAMETER0.2802 INCHES MINIMUM AND 0.2807 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPEROUND FIRST SHOULDER
WIDTH BETWEEN FLATS0.318 INCHES MINIMUM AND 0.324 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.443 INCHES MINIMUM AND 0.493 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNJF
THREAD QUANTITY PER INCH28


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us