5306-01-144-5572, BOLT,SHOULDER

5305-01-144-5571 SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5306-01-144-5572

Federal Supply Class:
5306

National Item Identification Number:
011445572

Description:
BOLT,SHOULDER

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No. 10 (0.190 IN.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than No. 10 (0.190 IN.) (5 mm) and those items with an inserted drive head, use SCREW, SHOULDER. For items which are No. 10 (0.190 IN.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use BOLT, EXTERNALLY RELIEVED BODY. Excludes THUMBSCREW.

Manufacturer Information:

121503-3D14	80539	SPS TECHNOLOGIES, LLC
AIC1295-3D14	06725	SPS TECHNOLOGIES, LLC
GB511DL3D14	26512	NORTHROP GRUMMAN SYSTEMS CORPORATION
HS148-3D14	73197	HI-SHEAR CORPORATION
HS148-3D14	L4528	LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.065 INCHES MINIMUM AND 1.125 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	1.238 INCHES MINIMUM AND 1.278 INCHES MAXIMUM
HARDNESS RATING	36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM
HEAD STYLE	HEXAGON
MATERIAL	STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OVERALL
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE
SHOULDER DIAMETER	0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH	0.885 INCHES MINIMUM AND 0.905 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPE	ROUND FIRST SHOULDER
WIDTH BETWEEN FLATS	0.428 INCHES MINIMUM AND 0.440 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY2,CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THREAD CLASS	3A
THREAD LENGTH	0.271 INCHES MINIMUM AND 0.362 INCHES MAXIMUM
THREAD DIRECTION	RIGHT-HAND
THREAD SERIES DESIGNATOR	UNJF
THREAD QUANTITY PER INCH	32

Click here to Register for Free 30-day Trial