5306-01-145-4382 BOLT,SHOULDER Index 5320-01-145-4384 PIN-RIVET

National Stock Number:
5306-01-145-4383

Federal Supply Class:
5306

National Item Identification Number:
011454383

Description:
BOLT,SHOULDER

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No. 10 (0.190 IN.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than No. 10 (0.190 IN.) (5 mm) and those items with an inserted drive head, use SCREW, SHOULDER. For items which are No. 10 (0.190 IN.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use BOLT, EXTERNALLY RELIEVED BODY. Excludes THUMBSCREW.


Manufacturer Information:
122915-5D2480539SPS TECHNOLOGIES, LLC
MB161-5D2473197HI-SHEAR CORPORATION
ST3M839-5D2476301THE BOEING COMPANY
VS3190-5D24X92215HOWMET GLOBAL FASTENING SYSTEMS INC
MB161-5D24L4528LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER1.828 INCHES MINIMUM AND 1.868 INCHES MAXIMUM FIRST HOLE
EXTENDED WASHER DIAMETER0.575 INCHES MINIMUM AND 0.585 INCHES MAXIMUM
EXTENDED WASHER THICKNESS0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM
FASTENER LENGTH2.036 INCHES MINIMUM AND 2.066 INCHES MAXIMUM
HEAD HEIGHT0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD MINOR DIAMETER0.383 INCHES MINIMUM AND 0.389 INCHES MAXIMUM
HEAD STYLESPLINE EXTENDED WASHER
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP XM-13 OVERALL
MINIMUM TENSILE STRENGTH220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.312 INCHES
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE
SHOULDER DIAMETER0.3271 INCHES MINIMUM AND 0.3276 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPEROUND FIRST SHOULDER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.526 INCHES MINIMUM AND 0.576 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNJF
THREAD QUANTITY PER INCH24


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us