5305-01-147-0781 SETSCREW Index 5306-01-147-0783 BOLT,SHEAR

National Stock Number:
5306-01-147-0782

Federal Supply Class:
5306

National Item Identification Number:
011470782

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.


Manufacturer Information:
BACB30BH4C1081205THE BOEING COMPANY


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER0.813 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH0.954 INCHES MINIMUM AND 0.984 INCHES MAXIMUM
GRIP DIAMETER0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HARDNESS RATING24.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
HEAD STYLEHEXAGON
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALIRON ALLOY 660 OVERALL
MINIMUM YIELD STRENGTH85000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE
WIDTH BETWEEN FLATS0.428 INCHES MINIMUM AND 0.440 INCHES MAXIMUM
THREAD CLASS3A
THREAD LENGTH0.319 INCHES MINIMUM AND 0.369 INCHES MAXIMUM
THREAD DIRECTIONRIGHT-HAND
THREAD QUANTITY PER INCH28
THREAD SERIES DESIGNATORUNF


Click here to Register for Free 30-day Trial