| DISTANCE FROM THREADED END TO SHANK HOLE CENTER | 0.860 INCHES MINIMUM AND 0.892 INCHES MAXIMUM FIRST HOLE |
| DISTANCE FROM CENTER OF EYE TO SHANK END | 1.672 INCHES NOMINAL |
| EYE INSIDE DIAMETER | 0.375 INCHES MINIMUM AND 0.378 INCHES MAXIMUM |
| EYE OUTSIDE WIDTH | 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| EYE STOCK THICKNESS | 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM |
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| OVERALL LENGTH | 2.094 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 431 OVERALL |
| MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.375 INCHES |
| SHANK LENGTH | 1.062 INCHES MINIMUM AND 1.109 INCHES MAXIMUM |
| SHANK UNTHREADED HOLE DIAMETER | 0.096 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE |
| SHOULDER DIAMETER | 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| SHOULDER THICKNESS | 0.078 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| STYLE DESIGNATOR | ROUND, CLOSED W/SHOULDER |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.608 INCHES MINIMUM AND 0.687 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 24 |
| THREAD SERIES DESIGNATOR | UNF |