|
|
|
National Stock Number:
5306-01-163-3122
Federal Supply Class:
5306
National Item Identification Number:
011633122
Description:
BOLT,MACHINE
Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.
|
Manufacturer Information:
| B1821BH038C175C | 80204 | AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED | | FF-S-85 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS18154-63L | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| THREAD DIRECTION | RIGHT-HAND | | FASTENER LENGTH | 1.688 INCHES MINIMUM AND | | 1.750 INCHES MAXIMUM | | MATERIAL | STEEL OVERALL | | PLASTIC POLYAMIDE LOCKING FEATURE | | STEEL FASTENER | | THREAD LENGTH | 1.000 INCHES MINIMUM AND | | 1.188 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | THREAD QUANTITY PER INCH | 16 | | THREAD CLASS | 2A | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE J429 GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE FASTENER | | SURFACE TREATMENT | ZINC AND | | CHROMATE FASTENER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE FASTENER | | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND | | 38.0 ROCKWELL C MAXIMUM FASTENER | | MINIMUM TENSILE STRENGTH | 150000 POUNDS PER SQUARE INCH | | HEAD HEIGHT | 0.226 INCHES MINIMUM AND | | 0.243 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.551 INCHES MINIMUM AND | | 0.562 INCHES MAXIMUM | | LOCKING FEATURE | PATCH OR | | STRIP THREADS | | HOLE CONFIGURATION STYLE | HEXAGON FLATS | | HOLE TYPE | DRILLED | | HOLE QUANTITY | 1 | | HOLE DIAMETER | 0.060 INCHES MINIMUM AND | | 0.068 INCHES MAXIMUM | | FEATURES PROVIDED | FINISHED HEAD | | NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND | | 10P STYLE AND | | 8 GRADE | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81348 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | FF-S-85 |
|
|