|
|
|
National Stock Number:
5306-01-170-3184
Federal Supply Class:
5306
National Item Identification Number:
011703184
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| 36B510580P1 | 07639 | GE AVIATION SYSTEMS LLC | | 36B510580P1 | 30221 | GENERAL ELECTRIC CO ARMAMENT AND ELECTRICAL SYSTEMS DEPT ELECTRICAL SYSTEMS PRODUCTS DEPT | | 77555-4H-4 | 56878 | SPS TECHNOLOGIES, LLC |
|
Techincal Specification:
| EXTENDED WASHER THICKNESS | 0.069 INCHES NOMINAL | | EXTENDED WASHER DIAMETER | 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM | | FASTENER LENGTH | 0.685 INCHES MINIMUM AND 0.715 INCHES MAXIMUM | | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | | GRIP LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | HEAD HEIGHT | 0.231 INCHES NOMINAL | | HEAD MINOR DIAMETER | 0.304 INCHES MINIMUM AND 0.313 INCHES MAXIMUM | | HEAD STYLE | SPLINE EXTENDED WASHER | | HOLE CONFIGURATION STYLE | DOUBLE HEXAGON LONGITUDINAL HOLE | | HOLE DIAMETER | 0.032 INCHES MINIMUM AND 0.042 INCHES MAXIMUM | | HOLE QUANTITY | 4 | | HOLE TYPE | DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | SPS-M-663,FSCM 30221 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | III PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | PROPRIETARY CHARACTERISTICS | PACS | | MINIMUM TENSILE STRENGTH | 260000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.425 INCHES MINIMUM AND 0.475 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 28 | | THREAD SERIES DESIGNATOR | UNJF |
|
|