|
|
|
National Stock Number:
5306-01-175-9274
Federal Supply Class:
5306
National Item Identification Number:
011759274
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| S8402-7A | 0HBF7 | BLANC AIRCRAFT FASTENERS INC | | S8402-7A | 59364 | HONEYWELL INTERNATIONAL INC. | | S8402-7A | 59915 | SERVICE & SALES INC | | S8402-7A | 70210 | HONEYWELL INTERNATIONAL INC. | | S8402-7A | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| FASTENER LENGTH | 0.890 INCHES MINIMUM AND 0.937 INCHES MAXIMUM | | GRIP DIAMETER | 0.1860 INCHES MINIMUM AND 0.1890 INCHES MAXIMUM | | GRIP LENGTH | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM | | HEAD HEIGHT | 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 321 OVERALL OR STEEL COMP 347 OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | MINIMUM TENSILE STRENGTH | 75000 POUNDS PER SQUARE INCH | | MINIMUM YIELD STRENGTH | 22000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | WIDTH BETWEEN FLATS | 0.365 INCHES MINIMUM AND 0.377 INCHES MAXIMUM | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.374 INCHES MINIMUM AND 0.453 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNF |
|
|