|
|
|
National Stock Number:
5306-01-179-4412
Federal Supply Class:
5306
National Item Identification Number:
011794412
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 10116104 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 122895-5D20 | 80539 | SPS TECHNOLOGIES, LLC | | AIC687-5D20 | 06725 | SPS TECHNOLOGIES, LLC | | GS1015-5D20 | 1EM77 | B & B SPECIALTIES INC | | MB154-5D20 | 73197 | HI-SHEAR CORPORATION | | MB154-5D20 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC | | VCG0001-5D20 | 06710 | VALLEY-TODECO, INC. | | ST3M711-5D20 | 0ZC92 | HEARTLAND PRECISION FASTENERS INC | | S406-5D20 | 17446 | HUCK INTERNATIONAL, INC | | PBF1265-5D20 | 27624 | SPS TECHNOLOGIES LLC | | ST3M744-5D20 | 58998 | FASTENER INNOVATION TECHNOLOGY, INC. | | ST3M744-5D20 | 5M902 | HOWMET GLOBAL FASTENING SYSTEMS INC. | | ST3M744-5D20 | 76301 | THE BOEING COMPANY | | S406-5D20 | 97928 | HUCK INTL INC | | VS3174-5D20 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | VS3174-5D20 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.507 INCHES MINIMUM AND 1.517 INCHES MAXIMUM FIRST HOLE | | FASTENER LENGTH | 1.615 INCHES MINIMUM AND 1.635 INCHES MAXIMUM | | GRIP DIAMETER | 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM | | GRIP LENGTH | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM | | HEAD HEIGHT | 0.187 INCHES NOMINAL | | HEAD MINOR DIAMETER | 0.514 INCHES MINIMUM AND 0.521 INCHES MAXIMUM | | HEAD STYLE | SPLINE DRIVE SHEAR HEAD | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5627 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP XM-13 OVERALL | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD LENGTH | 0.355 INCHES MINIMUM AND 0.385 INCHES MAXIMUM | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNJF |
|
|