5306-01-187-0643, BOLT,MACHINE

National Stock Number:
5306-01-187-0643

Federal Supply Class:
5306

National Item Identification Number:
011870643

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.

Manufacturer Information:

AES01F625A50A98	05047	THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS
AES01F625A50WA6AAB	80204	AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED
B1821BH063F150C	80204	AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED
FF-S-85	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS18153-137L	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

THREAD DIRECTION	RIGHT-HAND
FASTENER LENGTH	1.438 INCHES MINIMUM AND
	1.500 INCHES MAXIMUM
MATERIAL	STEEL OVERALL
	PLASTIC POLYAMIDE LOCKING FEATURE
	STEEL FASTENER
THREAD LENGTH	1.500 INCHES NOMINAL
HEAD STYLE	HEXAGON
THREAD SERIES DESIGNATOR	UNF
NOMINAL THREAD DIAMETER	0.625 INCHES
THREAD QUANTITY PER INCH	18
THREAD CLASS	2A
MATERIAL DOCUMENT AND CLASSIFICATION	SAE J429 GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
SURFACE TREATMENT	CADMIUM AND
	CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE FASTENER
HARDNESS RATING	32.0 ROCKWELL C MINIMUM AND
	38.0 ROCKWELL C MAXIMUM FASTENER
MINIMUM TENSILE STRENGTH	150000 POUNDS PER SQUARE INCH
HEAD HEIGHT	0.378 INCHES MINIMUM AND
	0.403 INCHES MAXIMUM
WIDTH BETWEEN FLATS	0.922 INCHES MINIMUM AND
	0.938 INCHES MAXIMUM
LOCKING FEATURE	PATCH OR
	STRIP THREADS
HOLE CONFIGURATION STYLE	HEXAGON FLATS
HOLE TYPE	DRILLED
HOLE QUANTITY	1
HOLE DIAMETER	0.092 INCHES MINIMUM AND
	0.100 INCHES MAXIMUM
SPECIAL FEATURES	LOCKING FEATURE IS PLASTIC POLYAMIDE
NONDEFINITIVE SPEC/STD DATA	2 TYPE AND
	10P STYLE AND
	8 GRADE
SPEC/STD CONTROLLING DATA
MANUFACTURERS CODE	81348
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	FF-S-85

Click here to Register for Free 30-day Trial