|
|
|
National Stock Number:
5306-01-188-6843
Federal Supply Class:
5306
National Item Identification Number:
011886843
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 801651-4D11 | 0PTK6 | SPS TECHNOLOGIES INC | | MB251-4D11 | 73197 | HI-SHEAR CORPORATION | | SC2663-4-11D | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | PBF1264-4D11 | 27624 | SPS TECHNOLOGIES LLC | | ST3M731-4D11 | 76301 | THE BOEING COMPANY | | MB251-4D11 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC | | VS3207-4-11D | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | ST3M731-4D11 | K5673 | SPS TECHNOLOGIES LTD TJ BROOKS DIVISION |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.907 INCHES MINIMUM AND 0.957 INCHES MAXIMUM FIRST HOLE | | FASTENER LENGTH | 1.098 INCHES MINIMUM AND 1.128 INCHES MAXIMUM | | FEATURES PROVIDED | FINISHED HEAD | | GRIP LENGTH | 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM | | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | | HEAD HEIGHT | 0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS4697,COMP 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | TITANIUM ALLOY OVERALL | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE | | SURFACE FINISH | 16.0 MICROINCHES THREADS | | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD | | SURFACE FINISH | 63.0 MICROINCHES GRIP | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-83488,TY 2,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ALUMINUM OVERALL | | THREAD CLASS | 3A | | THREAD LENGTH | 0.400 INCHES MINIMUM AND 0.450 INCHES MAXIMUM | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 28 | | THREAD SERIES DESIGNATOR | UNJF | | WIDTH BETWEEN FLATS | 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM |
|
|