|
|
|
National Stock Number:
5306-01-191-7208
Federal Supply Class:
5306
National Item Identification Number:
011917208
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 75A110063-2001 | 66841 | PRECI-MANUFACTURING, INCORPORATED | | 75A110063-2001 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.910 INCHES NOMINAL FIRST HOLE | | FASTENER LENGTH | 2.230 INCHES NOMINAL | | GRIP DIAMETER | 0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM | | GRIP LENGTH | 1.370 INCHES NOMINAL | | HEAD HEIGHT | 0.300 INCHES NOMINAL | | HEAD STYLE | HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6411 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL UNS K23080 OVERALL | | NOMINAL THREAD DIAMETER | 0.562 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | PS13102 CL B,FSCM 76301 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CHROMIUM OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.860 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 18 | | THREAD SERIES DESIGNATOR | UNJF | | WIDTH BETWEEN FLATS | 0.875 INCHES NOMINAL |
|
|