5306-01-191-8243, BOLT,MACHINE

National Stock Number:
5306-01-191-8243

Federal Supply Class:
5306

National Item Identification Number:
011918243

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.

Manufacturer Information:

B1821BH038F175C	80204	AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED
MS18153-63L	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

THREAD DIRECTION	RIGHT-HAND
FASTENER LENGTH	1.710 INCHES MINIMUM AND
	1.750 INCHES MAXIMUM
MATERIAL	STEEL OVERALL
	PLASTIC POLYAMIDE LOCKING FEATURE
	STEEL FASTENER
THREAD LENGTH	1.000 INCHES MINIMUM AND
	1.188 INCHES MAXIMUM
HEAD STYLE	HEXAGON
THREAD SERIES DESIGNATOR	UNF
NOMINAL THREAD DIAMETER	0.375 INCHES
THREAD QUANTITY PER INCH	24
THREAD CLASS	2A
MATERIAL DOCUMENT AND CLASSIFICATION	SAE J429 GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
SURFACE TREATMENT	ZINC AND
	CHROMATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE FASTENER
HARDNESS RATING	32.0 ROCKWELL C MINIMUM AND
	38.0 ROCKWELL C MAXIMUM FASTENER
MINIMUM TENSILE STRENGTH	150000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH	120000 POUNDS PER SQUARE INCH
HEAD HEIGHT	0.226 INCHES MINIMUM AND
	0.243 INCHES MAXIMUM
WIDTH BETWEEN FLATS	0.5510 INCHES MINIMUM AND
	0.5625 INCHES MAXIMUM
LOCKING FEATURE	PATCH OR
	PELLET OR
	STRIP THREADS
HOLE CONFIGURATION STYLE	HEXAGON FLATS
HOLE TYPE	DRILLED
HOLE QUANTITY	1
HOLE DIAMETER	0.060 INCHES MINIMUM AND
	0.068 INCHES MAXIMUM
SPECIAL FEATURES	LOCKING FEATURE PLASTIC POLYAMIDE
NONDEFINITIVE SPEC/STD DATA	10P STYLE AND
	8 GRADE AND
	2 TYPE

Click here to Register for Free 30-day Trial