5306-01-194-0589, BOLT,MACHINE

National Stock Number:
5306-01-194-0589

Federal Supply Class:
5306

National Item Identification Number:
011940589

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.

Manufacturer Information:

315344-36	82156	AMERACE CORP
315344-36	D9182	ZF INDUSTRIEANTRIEBE WITTEN GMBH
AEB02C375D25AW9A96	05047	THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS
ASME B18.2.1	05047	THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS
B1821BH038C425L	80204	AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED
MS90728-75L	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
PL-315344 PC 36	34712	LAKE SHORE SYSTEMS, INC.

Techincal Specification:

FASTENER LENGTH	4.156 INCHES MINIMUM AND 4.250 INCHES MAXIMUM
FEATURES PROVIDED	FINISHED HEAD
HARDNESS RATING	32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM FASTENER
HEAD HEIGHT	0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM
HEAD STYLE	HEXAGON
LOCKING FEATURE	PATCH OR STRIP THREADS
MATERIAL DOCUMENT AND CLASSIFICATION	SAE J429,GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A354,GRADE BD ASSN STD SINGLE MATERIAL RESPONSE FASTENER
MATERIAL	PLASTIC POLYAMIDE (NYLON) LOCKING FEATURE
MATERIAL	STEEL FASTENER
MATERIAL	STEEL OVERALL
MINIMUM TENSILE STRENGTH	150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.375 INCHES
SPECIAL FEATURES	LOCKING FEATURE IS PLASTIC POLYAMIDE
WIDTH BETWEEN FLATS	0.5510 INCHES MINIMUM AND 0.5625 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENT	ZINC AND CHROMATE FASTENER
THREAD DIRECTION	RIGHT-HAND
THREAD CLASS	2A
THREAD LENGTH	4.031 INCHES MINIMUM AND 4.250 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNC
THREAD QUANTITY PER INCH	16

Click here to Register for Free 30-day Trial