5306-01-194-9182, BOLT,SHEAR

National Stock Number:
5306-01-194-9182

Federal Supply Class:
5306

National Item Identification Number:
011949182

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

79894D4-8	56878	SPS TECHNOLOGIES, LLC
AIC558-4-D8	06725	SPS TECHNOLOGIES, LLC
BM17035-4-8	17446	HUCK INTERNATIONAL, INC
H408F4D8	17446	HUCK INTERNATIONAL, INC
GB511EB4D8	26512	NORTHROP GRUMMAN SYSTEMS CORPORATION
BM17035-4-8	97928	HUCK INTL INC
VCD0004-4-FS8	06710	VALLEY-TODECO, INC.
PBF1290-4-D8	27624	SPS TECHNOLOGIES LLC
VS3244F-4-D8	92215	HOWMET GLOBAL FASTENING SYSTEMS INC
H408F4D8	97928	HUCK INTL INC

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	0.636 INCHES MINIMUM AND 0.715 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	0.861 INCHES MINIMUM AND 0.908 INCHES MAXIMUM
GRIP DIAMETER	0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HARDNESS RATING	46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.154 INCHES MINIMUM AND 0.174 INCHES MAXIMUM
HEAD STYLE	DOUBLE HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP H11 OVERALL
MINIMUM TENSILE STRENGTH	220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.250 INCHES
PART NAME ASSIGNED BY CONTROLLING AGENCY	NAVY SPECIAL PROJECT
SHANK UNTHREADED HOLE DIAMETER	0.071 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE
SINGLE SHEAR STRENGTH	32000 POUNDS PER SQUARE INCH
WIDTH BETWEEN FLATS	0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THREAD DIRECTION	RIGHT-HAND
THREAD CLASS	3A
THREAD LENGTH	0.351 INCHES MINIMUM AND 0.418 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNJF
THREAD QUANTITY PER INCH	28

Click here to Register for Free 30-day Trial