|
|
|
National Stock Number:
5306-01-196-8073
Federal Supply Class:
5306
National Item Identification Number:
011968073
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| 122897-5H16 | 80539 | SPS TECHNOLOGIES, LLC | | AIC763-5H15 | 06725 | SPS TECHNOLOGIES, LLC | | AIC763-5H16 | 06725 | SPS TECHNOLOGIES, LLC | | GS1032-5H16 | 1EM77 | B & B SPECIALTIES INC | | MB156-5H16 | 73197 | HI-SHEAR CORPORATION | | MB156-5H16 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC | | VFK600-5H16 | 06710 | VALLEY-TODECO, INC. | | VS3190-5H16 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | S343-5H16 | 17446 | HUCK INTERNATIONAL, INC | | PBF1267-5H16 | 27624 | SPS TECHNOLOGIES LLC | | ST3M753-5H16 | 76301 | THE BOEING COMPANY | | ST3M753-5H16 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | VS3190-5H16 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | S343-5H16 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| EXTENDED WASHER THICKNESS | 0.017 INCHES MINIMUM AND 0.037 INCHES MAXIMUM | | EXTENDED WASHER DIAMETER | 0.349 INCHES MINIMUM AND 0.359 INCHES MAXIMUM | | FASTENER LENGTH | 1.384 INCHES MINIMUM AND 1.414 INCHES MAXIMUM | | GRIP DIAMETER | 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM | | GRIP LENGTH | 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM | | HEAD HEIGHT | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM | | HEAD MINOR DIAMETER | 0.234 INCHES MINIMUM AND 0.245 INCHES MAXIMUM | | HEAD STYLE | SPLINE EXTENDED WASHER | | HOLE CONFIGURATION STYLE | SPLINE | | HOLE DIAMETER | 0.032 INCHES MINIMUM AND 0.042 INCHES MAXIMUM | | HOLE QUANTITY | 4 | | HOLE TYPE | DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP XM-13 OVERALL | | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.499 INCHES MINIMUM AND 0.549 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 32 |
|
|