|
|
|
National Stock Number:
5306-01-209-7916
Federal Supply Class:
5306
National Item Identification Number:
012097916
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| 78544H-10-16 | 56878 | SPS TECHNOLOGIES, LLC |
|
Techincal Specification:
| EXTENDED WASHER DIAMETER | 1.040 INCHES MINIMUM AND 1.050 INCHES MAXIMUM | | EXTENDED WASHER THICKNESS | 0.140 INCHES MINIMUM AND 0.160 INCHES MAXIMUM | | FASTENER LENGTH | 1.860 INCHES MINIMUM AND 1.890 INCHES MAXIMUM | | GRIP DIAMETER | 0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM | | GRIP LENGTH | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM | | HEAD HEIGHT | 0.608 INCHES MINIMUM AND 0.628 INCHES MAXIMUM | | HEAD STYLE | DOUBLE HEXAGON W/HOLE | | HOLE DIAMETER | 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM | | HOLE CONFIGURATION STYLE | DOUBLE HEXAGON LONGITUDINAL HOLE | | HOLE QUANTITY | 4 | | HOLE TYPE | DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | NICKEL ALLOY 718 OVERALL | | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.625 INCHES | | SPECIAL FEATURES | ASYMMETRIC THREAD; 4 SLOTS ON HEAD | | WIDTH BETWEEN FLATS | 0.682 INCHES MINIMUM AND 0.691 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.850 INCHES MINIMUM AND 0.900 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 18 | | THREAD SERIES DESIGNATOR | UNF |
|
|