5306-01-275-9911 BOLT,MACHINE Index 5306-01-275-9913 BOLT,MACHINE

National Stock Number:
5306-01-275-9912

Federal Supply Class:
5306

National Item Identification Number:
012759912

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.


Manufacturer Information:
AN6C23D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
AN6CH2388044AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER2.234 INCHES MINIMUM AND 2.266 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH2.437 INCHES MINIMUM AND 2.484 INCHES MAXIMUM
FEATURES PROVIDEDFINISHED HEAD
GRIP LENGTH1.796 INCHES MINIMUM AND 1.828 INCHES MAXIMUM
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.203 INCHES MINIMUM AND 0.235 INCHES MAXIMUM
HEAD STYLEHEXAGON
HOLE CONFIGURATION STYLEHEXAGON FLATS
HOLE DIAMETER0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HOLE QUANTITY1
HOLE TYPEDRILLED
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 431 OVERALL
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.375 INCHES
SHANK UNTHREADED HOLE DIAMETER0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENTPASSIVATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.609 INCHES MINIMUM AND 0.688 INCHES MAXIMUM
THREAD QUANTITY PER INCH24
THREAD SERIES DESIGNATORUNF
WIDTH BETWEEN FLATS0.553 INCHES MINIMUM AND 0.565 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us