5306-01-286-0864, BOLT,MACHINE

National Stock Number:
5306-01-286-0864

Federal Supply Class:
5306

National Item Identification Number:
012860864

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.

Manufacturer Information:

B1821BH125F400L	80204	AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED
FF-S-85	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MIL-F-18240 1.250-12UNF-2A	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS90727-277L	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
M18240 CONF-B 4 .000 LG CBN STL	D9182	ZF INDUSTRIEANTRIEBE WITTEN GMBH

Techincal Specification:

FASTENER LENGTH	3.812 INCHES MINIMUM AND 4.000 INCHES MAXIMUM
FEATURES PROVIDED	FINISHED HEAD
HARDNESS RATING	32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM FASTENER
HEAD HEIGHT	0.749 INCHES MINIMUM AND 0.813 INCHES MAXIMUM
HEAD STYLE	HEXAGON
LOCKING FEATURE	PATCH OR STRIP THREADS
MATERIAL DOCUMENT AND CLASSIFICATION	SAE J429,GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A354,GRADE BD ASSN STD SINGLE MATERIAL RESPONSE FASTENER
MATERIAL	PLASTIC POLYAMIDE (NYLON) LOCKING FEATURE
MATERIAL	STEEL FASTENER
MINIMUM TENSILE STRENGTH	150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	1.250 INCHES
NONDEFINITIVE SPEC/STD DATA	2 TYPE AND 10P STYLE
WIDTH BETWEEN FLATS	1.812 INCHES MINIMUM AND 1.875 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENT	ZINC AND CHROMATE FASTENER
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	2.750 INCHES MINIMUM
THREAD SERIES DESIGNATOR	UNF
THREAD QUANTITY PER INCH	12

Click here to Register for Free 30-day Trial