5306-01-286-5434 BOLT,INTERNALLY RELIEVED BODY Index 5305-01-286-5436 SCREW,CAP,SOCKET HEAD

National Stock Number:
5306-01-286-5435

Federal Supply Class:
5306

National Item Identification Number:
012865435

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.


Manufacturer Information:
SS5116-10-6856878SPS TECHNOLOGIES, LLC
SS5116-10-6878286SIKORSKY AIRCRAFT CORPORATION
SS5116-10-6884256AVIBANK MFG., INC.


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER4.968 INCHES MINIMUM AND 5.018 INCHES MAXIMUM FIRST HOLE
EXTENDED WASHER DIAMETER1.040 INCHES MINIMUM AND 1.050 INCHES MAXIMUM
EXTENDED WASHER THICKNESS0.140 INCHES MINIMUM AND 0.160 INCHES MAXIMUM
FASTENER LENGTH5.736 INCHES MINIMUM AND 5.766 INCHES MAXIMUM
GRIP DIAMETER0.623 INCHES MINIMUM AND 0.624 INCHES MAXIMUM
GRIP LENGTH4.240 INCHES MINIMUM AND 4.260 INCHES MAXIMUM
HEAD HEIGHT0.608 INCHES MINIMUM AND 0.628 INCHES MAXIMUM
HEAD STYLEDOUBLE HEXAGON W/HOLE
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5629 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
MATERIALSTEEL COMP XM-13 FASTENER
MINIMUM TENSILE STRENGTH205000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.625 INCHES
SPECIAL FEATURESASSEMBLY AREA EXTENDED AT THREADED END,0.537 NOM. IN. LENGTH,0.549 MIN. IN. AND 0.552 MAX. IN. DIA.; EXTENSION ASSEMBLY CONTAINS FOUR PARTS; PAWL,SPRING,PLUG,GROOVE PIN; MATERIAL FOR PARTS,PAWL ST0187 PER AMS 5629,SPRING ST0302 OR ST0304 PER ASTM A580 OR ST0631 PER AMS 5678,PLUG 300 SERIES PER ASTM A582,GROOVE PIN 300 SERIES PER FED-STD-66
SHANK UNTHREADED HOLE DIAMETER0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
WIDTH BETWEEN FLATS0.662 INCHES MINIMUM AND 0.687 INCHES MAXIMUM
SURFACE FINISH32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH32.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.954 INCHES MINIMUM AND 0.974 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNJF
THREAD QUANTITY PER INCH16


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us