|
|
|
National Stock Number:
5306-01-288-9153
Federal Supply Class:
5306
National Item Identification Number:
012889153
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| J836P026A | 07482 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| EXTENDED WASHER DIAMETER | 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM | | EXTENDED WASHER THICKNESS | 0.090 INCHES MINIMUM | | FASTENER LENGTH | 2.534 INCHES MINIMUM AND 2.554 INCHES MAXIMUM | | GRIP DIAMETER | 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM | | GRIP LENGTH | 1.683 INCHES MINIMUM AND 1.693 INCHES MAXIMUM | | HEAD HEIGHT | 0.373 INCHES MINIMUM AND 0.393 INCHES MAXIMUM | | HEAD STYLE | DOUBLE HEXAGON EXTENDED WASHER | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5708 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | NICKEL ALLOY UNS N07001 OVERALL | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | WIDTH BETWEEN FLATS | 0.437 INCHES NOMINAL | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE FINISH | 32.0 MICROINCHES THREADS | | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.841 INCHES MINIMUM AND 0.871 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNJF |
|
|