|
|
|
National Stock Number:
5306-01-295-3023
Federal Supply Class:
5306
National Item Identification Number:
012953023
Description:
BOLT,MACHINE
Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.
|
Manufacturer Information:
| 9130M43P01 | 07482 | GENERAL ELECTRIC COMPANY | | C5130686 | 57957 | US ARMY ELECTRONIC WARFARE LABORATORY SEE CAGE CODE 80063 | | LP35307-310 | 03038 | LONG-LOK, LLC | | L34976P010 | 07482 | GENERAL ELECTRIC COMPANY | | L34976P310 | 56878 | SPS TECHNOLOGIES, LLC | | C5130686 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR | | T1227-010 | 16941 | LONG-LOK LLC | | T1227-P010 | 16941 | LONG-LOK LLC | | MS35307-310 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| CRITICALITY CODE JUSTIFICATION | FEAT | | FASTENER LENGTH | 1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM | | FEATURES PROVIDED | FINISHED HEAD | | HARDNESS RATING | 80.0 ROCKWELL C MINIMUM FASTENER | | HEAD HEIGHT | 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | LOCKING FEATURE | PATCH OR STRIP OR PELLET THREADS | | MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 FASTENER | | MINIMUM YIELD STRENGTH | 30000 POUNDS PER SQUARE INCH | | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | SPECIAL FEATURES | WEAPON SYSTEM ESSENTIAL | | WIDTH BETWEEN FLATS | 0.428 INCHES MINIMUM AND 0.437 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER | | SURFACE TREATMENT | PASSIVATE FASTENER | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 2A | | THREAD LENGTH | 0.750 INCHES MINIMUM | | THREAD SERIES DESIGNATOR | UNC | | THREAD QUANTITY PER INCH | 20 |
|
|