5306-01-296-9833 BOLT,MACHINE Index 5305-01-296-9835 SCREW,DRIVE

National Stock Number:
5306-01-296-9834

Federal Supply Class:
5306

National Item Identification Number:
012969834

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.


Manufacturer Information:
C513015457957US ARMY ELECTRONIC WARFARE LABORATORY SEE CAGE CODE 80063
C513015480063US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
L34976P00603038LONG-LOK, LLC
LP35307-30603038LONG-LOK, LLC
L34976P00607482GENERAL ELECTRIC COMPANY
L34976P30656878SPS TECHNOLOGIES, LLC
T1227-P00616941LONG-LOK LLC


Techincal Specification:
COLORGREEN HEAD
CRITICALITY CODE JUSTIFICATIONFEAT
FASTENER LENGTH0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
FEATURES PROVIDEDFINISHED HEAD
HARDNESS RATING80.0 ROCKWELL C MINIMUM FASTENER
HEAD HEIGHT0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM
HEAD STYLEHEXAGON
LOCKING FEATUREPELLET OR STRIP OR PATCH THREADS
MATERIALSTEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 FASTENER
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.250 INCHES
SPECIAL FEATURESWEAPON SYSTEM ESSENTIAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENTPASSIVATE FASTENER
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.594 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH20
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
WIDTH BETWEEN FLATS0.428 INCHES MINIMUM AND 0.437 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us