5306-01-308-2846, BOLT,SHEAR

National Stock Number:
5306-01-308-2846

Federal Supply Class:
5306

National Item Identification Number:
013082846

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

NAS6209-42DH

80205

NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

THREAD SERIES DESIGNATOR	UNJF
NOMINAL THREAD DIAMETER	0.562 INCHES
THREAD QUANTITY PER INCH	18
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.569 INCHES MINIMUM AND
	0.619 INCHES MAXIMUM
FASTENER LENGTH	3.209 INCHES MINIMUM AND
	3.229 INCHES MAXIMUM
MATERIAL	STEEL COMP E4340 OR
	STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR
	MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR
	AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND
	CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING	36.0 ROCKWELL C MINIMUM AND
	40.0 ROCKWELL C MAXIMUM OVERALL
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
HEAD STYLE	DISHED HEXAGON
HEAD HEIGHT	0.281 INCHES MINIMUM AND
	0.296 INCHES MAXIMUM
WIDTH BETWEEN FLATS	0.865 INCHES MINIMUM AND
	0.877 INCHES MAXIMUM
HOLE CONFIGURATION STYLE	HEXAGON FLATS
HOLE TYPE	DRILLED
HOLE QUANTITY	3
HOLE DIAMETER	0.188 INCHES MINIMUM AND
	0.203 INCHES MAXIMUM
GRIP LENGTH	2.615 INCHES MINIMUM AND
	2.635 INCHES MAXIMUM
GRIP DIAMETER	0.5605 INCHES MINIMUM AND
	0.5615 INCHES MAXIMUM
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
	32.0 MICROINCHES GRIP
	32.0 MICROINCHES THREADS
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	3.237 INCHES MINIMUM AND
	3.287 INCHES MAXIMUM FIRST HOLE
SHANK UNTHREADED HOLE DIAMETER	0.141 INCHES MINIMUM AND
	0.151 INCHES MAXIMUM FIRST HOLE
SPECIFICATION/STANDARD DATA	80205-NAS6209 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

Click here to Register for Free 30-day Trial