|
|
|
National Stock Number:
5306-01-358-2728
Federal Supply Class:
5306
National Item Identification Number:
013582728
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| BACB30NF12D38 | 06710 | VALLEY-TODECO, INC. | | BACB30NF12D38 | 06725 | SPS TECHNOLOGIES, LLC | | BACB30NF12D38 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | BACB30NF12D38 | 17446 | HUCK INTERNATIONAL, INC | | BACB30NF12D38 | 17934 | ELASTOMERICS ENGINEERING INC | | BACB30NF12D38 | 17943 | FEDERAL MANUFACTURING CORP | | BACB30NF12D38 | 27624 | SPS TECHNOLOGIES LLC | | BACB30NF12D38 | 56878 | SPS TECHNOLOGIES, LLC | | BACB30NF12D38 | 80539 | SPS TECHNOLOGIES, LLC | | BACB30NF12D38 | 81205 | THE BOEING COMPANY | | BACB30NF12D38 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | BACB30NF12D38 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 2.920 INCHES NOMINAL FIRST HOLE | | FASTENER LENGTH | 3.033 INCHES MINIMUM AND 3.063 INCHES MAXIMUM | | GRIP DIAMETER | 0.7480 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM | | GRIP LENGTH | 2.365 INCHES MINIMUM AND 2.385 INCHES MAXIMUM | | HEAD HEIGHT | 0.375 INCHES MINIMUM AND 0.390 INCHES MAXIMUM | | HEAD STYLE | DISHED HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP E4340 OR STEEL COMP 8740 OVERALL | | MINIMUM TENSILE STRENGTH | 140000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.750 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE | | WIDTH BETWEEN FLATS | 1.052 INCHES MINIMUM AND 1.064 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD32.0 MICROINCHES GRIP32.0 MICROINCHES THREADS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.673 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 16 |
|
|