5306-01-366-1111, BOLT,MACHINE

5905-01-366-1110 RESISTOR,VARIABLE,WIRE WOUND,NON

National Stock Number:
5306-01-366-1111

Federal Supply Class:
5306

National Item Identification Number:
013661111

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.

Manufacturer Information:

624254-1028DN3

80020

NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2

Techincal Specification:

EXTENDED WASHER DIAMETER	0.921 INCHES MINIMUM AND 0.937 INCHES MAXIMUM
EXTENDED WASHER THICKNESS	0.255 INCHES MINIMUM AND 0.275 INCHES MAXIMUM
FASTENER LENGTH	3.469 INCHES MINIMUM AND 3.531 INCHES MAXIMUM
GRIP LENGTH	0.6163 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM
HARDNESS RATING	32.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.616 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD STYLE	DOUBLE HEXAGON EXTENDED WASHER
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR ASTM A29 ASSN STD 3RD MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8640 OVERALL
MINIMUM TENSILE STRENGTH	150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.625 INCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	A000 FED STD 3RD TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OVERALL
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	2.219 INCHES NOMINAL
THREAD QUANTITY PER INCH	11
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL COARSE (UNC)
WIDTH BETWEEN FLATS	0.620 INCHES MINIMUM AND 0.628 INCHES MAXIMUM

Click here to Register for Free 30-day Trial