5306-01-419-3899, BOLT,CLOSE TOLERANCE

National Stock Number:
5306-01-419-3899

Federal Supply Class:
5306

National Item Identification Number:
014193899

Description:
BOLT,CLOSE TOLERANCE

Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.

Manufacturer Information:

S4928913-3-10	06725	SPS TECHNOLOGIES, LLC
S4928913-3-10	0K620	SEQUENCE SUPPORT SERVICES INC
S4928913-3-10	17446	HUCK INTERNATIONAL, INC
S4928913-3-10	27624	SPS TECHNOLOGIES LLC
S4928913-3-10	50945	MERCURY AEROSPACE FASTENERS INC
S4928913-3-10	56878	SPS TECHNOLOGIES, LLC
S4928913-3-10	88277	THE BOEING COMPANY

Techincal Specification:

GRIP LENGTH	0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HARDNESS RATING	36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.110 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD STYLE	DISHED HEXAGON
MATERIAL	STEEL COMP 4140 OVERALL OR STEEL COMP 4340 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 6150 OVERALL
PROPRIETARY CHARACTERISTICS	PACS
NOMINAL THREAD DIAMETER	0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.070 INCHES MINIMUM THREADS AND 0.080 INCHES MAXIMUM THREADS
WIDTH BETWEEN FLATS	0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
SURFACE FINISH	63.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	63.0 MICROINCHES GRIP
SURFACE FINISH	32.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	DPS9.74, TYPE 1 MFR REF SINGLE TREATMENT RESPONSE HEAD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	DPS9.74, TYPE 1 MFR REF SINGLE TREATMENT RESPONSE THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	DPS9.84, TYPE 1 MFR REF SINGLE TREATMENT RESPONSE BEARING SURFACE OF HEAD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	DPS9.84, TYPE 1 MFR REF SINGLE TREATMENT RESPONSE GRIP
SURFACE TREATMENT	CADMIUM HEAD
SURFACE TREATMENT	CADMIUM THREADS
SURFACE TREATMENT	CHROMIUM BEARING SURFACE OF HEAD
SURFACE TREATMENT	CHROMIUM GRIP
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.276 INCHES MAXIMUM
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNF
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	0.784 INCHES NOMINAL THREADS
FASTENER LENGTH	0.886 INCHES MINIMUM AND 0.916 INCHES MAXIMUM
GRIP DIAMETER	0.1885 INCHES MINIMUM AND 0.1894 INCHES MAXIMUM

Click here to Register for Free 30-day Trial