|
|
|
National Stock Number:
5306-01-433-9007
Federal Supply Class:
5306
National Item Identification Number:
014339007
Description:
BOLT,EYE
Detail:
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also BOLT, HOOK. Excludes CONNECTOR, ROD END.
|
Manufacturer Information:
| AN43B-C10 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | AN43B-C10 | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE |
|
Techincal Specification:
| DISTANCE FROM CENTER OF EYE TO SHANK END | 1.500 INCHES NOMINAL | | DISTANCE FROM THREADED END TO SHANK HOLE CENTER | 0.094 INCHES NOMINAL THREADS | | EYE INSIDE DIAMETER | 0.250 INCHES NOMINAL | | EYE OUTSIDE WIDTH | 0.500 INCHES NOMINAL | | EYE STOCK THICKNESS | 0.125 INCHES NOMINAL | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 431 OVERALL | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | OVERALL LENGTH | 1.781 INCHES NOMINAL | | SHANK UNTHREADED HOLE DIAMETER | 0.190 INCHES MINIMUM AND 0.192 INCHES MAXIMUM THREADS | | SHANK LENGTH | 1.015 INCHES MINIMUM AND 1.047 INCHES MAXIMUM | | SHOULDER DIAMETER | 0.500 INCHES NOMINAL | | SHOULDER THICKNESS | 0.078 INCHES NOMINAL | | STYLE DESIGNATOR | ROUND, CLOSED W/SHOULDER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.406 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 28 | | THREAD SERIES DESIGNATOR | UNF |
|
|