|
|
|
National Stock Number:
5306-01-472-2691
Federal Supply Class:
5306
National Item Identification Number:
014722691
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| BACB30FD5H5 | 81205 | THE BOEING COMPANY | | BACB30FD5H5 | A0126 | LEONARDO SPA HELICOPTERS DIVISION -PRODUCTION SITE |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | THREAD QUANTITY PER INCH | 24 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.547 INCHES MINIMUM AND | | 0.597 INCHES MAXIMUM | | FASTENER LENGTH | 0.807 INCHES MINIMUM AND | | 0.837 INCHES MAXIMUM | | MATERIAL | STEEL COMP E4340 OR | | STEEL COMP 8740 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR | | MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH | | HEAD STYLE | DOUBLE HEXAGON W/HOLE | | HEAD HEIGHT | 0.338 INCHES MINIMUM AND | | 0.358 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.367 INCHES MINIMUM AND | | 0.376 INCHES MAXIMUM | | EXTENDED WASHER DIAMETER | 0.521 INCHES MINIMUM AND | | 0.531 INCHES MAXIMUM | | EXTENDED WASHER THICKNESS | 0.072 INCHES MINIMUM AND | | 0.092 INCHES MAXIMUM | | HOLE CONFIGURATION STYLE | ROUND LONGITUDINAL HOLE | | HOLE TYPE | DRILLED | | HOLE QUANTITY | 4 | | HOLE DIAMETER | 0.055 INCHES NOMINAL | | GRIP LENGTH | 0.302 INCHES MINIMUM AND | | 0.322 INCHES MAXIMUM | | GRIP DIAMETER | 0.3110 INCHES MINIMUM AND | | 0.3120 INCHES MAXIMUM |
|
|