|
|
|
National Stock Number:
5306-01-475-8344
Federal Supply Class:
5306
National Item Identification Number:
014758344
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| NAS6705DU19 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| FASTENER LENGTH | 1.657 INCHES MAXIMUM | | GRIP LENGTH | 1.188 INCHES MAXIMUM | | GRIP DIAMETER | 0.302 INCHES MINIMUM AND 0.304 INCHES MAXIMUM | | HEAD DIAMETER | 0.156 INCHES MINIMUM AND 0.171 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | HOLE TYPE | DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | A286 ASSN STD 1ST MATERIAL RESPONSE OR AMS5731 ASSN STD 2ND MATERIAL RESPONSE OR AMS5737 ASSN STD 3RD MATERIAL RESPONSE OR AMS5853 ASSN STD 4TH MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | WIDTH BETWEEN FLATS | 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.469 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 24 |
|
|