|
|
|
National Stock Number:
5306-01-480-4981
Federal Supply Class:
5306
National Item Identification Number:
014804981
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 3M1059-22D75 | 76301 | THE BOEING COMPANY | | 93955-22-75D | 56878 | SPS TECHNOLOGIES, LLC | | PBF1427D22-75 | 27624 | SPS TECHNOLOGIES LLC |
|
Techincal Specification:
| CRITICALITY CODE JUSTIFICATION | AGAV | | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 5.543 INCHES MINIMUM AND 5.563 INCHES MAXIMUM FIRST HOLE | | FASTENER LENGTH | 5.808 INCHES MINIMUM AND 5.838 INCHES MAXIMUM | | GRIP DIAMETER | 1.373 INCHES MINIMUM AND 1.374 INCHES MAXIMUM | | GRIP LENGTH | 4.688 INCHES NOMINAL | | HEAD HEIGHT | 0.750 INCHES NOMINAL | | HEAD MINOR DIAMETER | 2.367 INCHES MINIMUM AND 2.381 INCHES MAXIMUM | | HEAD STYLE | SPLINE DRIVE SHEAR HEAD | | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,CLOSE TOLERANCE,SPLINE DRIVE,SHORT THREAD,(145 KSI FSU)CRES | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5844 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COBALT COMP MP-35-N OVERALL | | MINIMUM TENSILE STRENGTH | 145000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 1.375 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.141 INCHES MINIMUM AND 0.146 INCHES MAXIMUM FIRST HOLE | | SURFACE FINISH | 32.0 MICROINCHES FASTENER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS-QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 1.135 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 12 |
|
|