5306-01-480-9925, BOLT,SHEAR

5330-01-480-9924 SEAL,NONMETALLIC ROUND SECTION

National Stock Number:
5306-01-480-9925

Federal Supply Class:
5306

National Item Identification Number:
014809925

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

MS14181H03024L	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS14181H03024L	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

CRITICALITY CODE JUSTIFICATION	AGAV
EXTENDED WASHER THICKNESS	0.017 INCHES MINIMUM AND 0.037 INCHES MAXIMUM
EXTENDED WASHER DIAMETER	0.349 INCHES MINIMUM AND 0.359 INCHES MAXIMUM
FASTENER LENGTH	1.918 INCHES MINIMUM AND 1.948 INCHES MAXIMUM
GRIP DIAMETER	0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH	1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM
HEAD HEIGHT	0.195 INCHES MINIMUM AND 0.215 INCHES MAXIMUM
HEAD MINOR DIAMETER	0.253 INCHES MINIMUM AND 0.259 INCHES MAXIMUM
HEAD STYLE	SPLINE EXTENDED WASHER
HOLE CONFIGURATION STYLE	SPLINE
HOLE DIAMETER	0.032 INCHES MINIMUM AND 0.042 INCHES MAXIMUM
HOLE QUANTITY	4
HOLE TYPE	DRILLED
PART NAME ASSIGNED BY CONTROLLING AGENCY	BOLT,TENSION:NICKEL ALLOY 718:220 KSI FTU;EXTERNAL WRENCHING,SPLINE DRIVE,FLANGED HEAD
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5662 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5663 ASSN STD 2ND MATERIAL RESPONSE OVERALL
MATERIAL	NICKEL ALLOY 718 OVERALL
MINIMUM TENSILE STRENGTH	220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.190 INCHES
SURFACE FINISH	32.0 MICROINCHES HEAD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD DIRECTION	RIGHT-HAND
THREAD CLASS	3A
THREAD LENGTH	0.408 INCHES NOMINAL
THREAD SERIES DESIGNATOR	UNJF
THREAD QUANTITY PER INCH	32

Click here to Register for Free 30-day Trial