| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 100.0 DEGREES MAXIMUM |
| FASTENER LENGTH | 2.035 INCHES NOMINAL |
| GRIP LENGTH | 1.131 INCHES MINIMUM AND 1.270 INCHES MAXIMUM |
| GRIP DIAMETER | 0.374 INCHES NOMINAL |
| HEAD DIAMETER | 0.672 INCHES NOMINAL |
| HEAD STYLE | FLAT COUNTERSUNK |
| LOCKING FEATURE | DETENT RING LOCKING FEATURE |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5731 NATIONAL STD/SPEC 1ST MATERIAL RESPONSE OR AMS 5737 NATIONAL STD/SPEC 2ND MATERIAL RESPONSE OVERALL |
| MATERIAL | IRON ALLOY 660 OVERALL |
| MINIMUM TENSILE STRENGTH | 7360 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.375 INCHES |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | STUD BOLT |
| POINT LENGTH | 0.100 INCHES NOMINAL |
| POINT STYLE | CHAMFER DOG |
| POINT CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| POINT DIAMETER | 0.330 INCHES MINIMUM AND 0.335 INCHES MAXIMUM |
| SINGLE SHEAR STRENGTH | 9400 POUNDS PER SQUARE INCH |
| SPECIAL FEATURES | DRIVE STYLE IS: RADIAL-SLOT RECESS/ FAIRCHILD AEROSPACE, NOT LISTED THIS FIIG. BORED HOLE, THREADED END, 0.130 IN DIA, 0.620 IN DP; WIRE FORM HOLD OUT SPRING INSERTED; 2 LEAD THREAD. |
| SUPPLEMENTARY FEATURES | STUD BOLTS SHALL HAVE POLYPROPLENE HEAD PROTECTIVE RING INSTALLED FOR SHIPPING, CUSTOMER TO REMOVE BEFORE INSTALLING |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS QQ-P-35 NATIONAL STD/SPEC ALL TREATMENT RESPONSES OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 3A |
| THREAD LENGTH | 0.665 INCHES MINIMUM AND 0.804 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNF |
| THREAD QUANTITY PER INCH | 24 |