|
|
|
National Stock Number:
5306-01-496-1794
Federal Supply Class:
5306
National Item Identification Number:
014961794
Description:
BOLT,MACHINE
Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.
|
Manufacturer Information:
| AN17CH46 | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | | AN17CH46 | K7548 | B/E AEROSPACE CONSUMABLES MANAGEMENT II LIMITED |
|
Techincal Specification:
| FASTENER LENGTH | 4.985 INCHES MINIMUM AND 5.031 INCHES MAXIMUM | | GRIP DIAMETER | 0.993 INCHES MINIMUM AND 0.999 INCHES MAXIMUM | | GRIP LENGTH | 1.376 INCHES MINIMUM AND 1.390 INCHES MAXIMUM | | HEAD HEIGHT | 4.843 INCHES NOMINAL | | HEAD STYLE | HEXAGON | | HOLE CONFIGURATION STYLE | ROUND | | HOLE DIAMETER | 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM | | HOLE QUANTITY | 1 | | HOLE TYPE | DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 431 OVERALL | | NOMINAL THREAD DIAMETER | 1.875 INCHES | | WIDTH BETWEEN FLATS | 1.428 INCHES MINIMUM AND 1.441 INCHES MAXIMUM | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 1.375 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF | | THREAD QUANTITY PER INCH | 14 |
|
|