|
|
|
National Stock Number:
5306-01-500-4205
Federal Supply Class:
5306
National Item Identification Number:
015004205
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| SS5211-6H18 | 06725 | SPS TECHNOLOGIES, LLC | | SS5211-6H18 | 27624 | SPS TECHNOLOGIES LLC | | SS5211-6H18 | 4GP55 | ACUFAST AIRCRAFT PRODUCTS | | SS5211-6H18 | 56878 | SPS TECHNOLOGIES, LLC | | SS5211-6H18 | 78286 | SIKORSKY AIRCRAFT CORPORATION | | SS5211-6H18 | 84256 | AVIBANK MFG., INC. | | SS5211-6H18 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| EXTENDED WASHER DIAMETER | 0.639 INCHES MINIMUM AND 0.649 INCHES MAXIMUM | | EXTENDED WASHER THICKNESS | 0.081 INCHES MINIMUM AND 0.101 INCHES MAXIMUM | | FASTENER LENGTH | 1.811 INCHES MINIMUM AND 1.843 INCHES MAXIMUM | | GRIP DIAMETER | 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM | | GRIP LENGTH | 1.125 INCHES MINIMUM AND 1.135 INCHES MAXIMUM | | HEAD HEIGHT | 0.378 INCHES MINIMUM AND 0.398 INCHES MAXIMUM | | HEAD STYLE | DOUBLE HEXAGON W/HOLE | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-8844;CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4340 OVERALL | | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | WIDTH BETWEEN FLATS | 0.4375 INCHES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS2401-3 ASSN STD 1ST TREATMENT RESPONSE AND QQ-P-416;TYPE 2 FED SPEC 2ND TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.702 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 24 |
|
|