6625-01-501-9034 GENERATOR,FUNCTION,ELECTRONIC TE Index 5950-01-501-9036 TRANSFORMER,POWER

National Stock Number:
5306-01-501-9035

Federal Supply Class:
5306

National Item Identification Number:
015019035

Description:
BOLT,CLOSE TOLERANCE

Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.


Manufacturer Information:
69-42616-181205THE BOEING COMPANY


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER2.481 INCHES MINIMUM FIRST HOLE AND 2.531 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH2.630 INCHES MINIMUM AND 2.660 INCHES MAXIMUM
GRIP DIAMETER0.978 INCHES MINIMUM AND 0.988 INCHES MAXIMUM
GRIP LENGTH1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM
HEAD HEIGHT0.500 INCHES MINIMUM AND 0.515 INCHES MAXIMUM
HEAD STYLEHEXAGON
MATERIALSTEEL OVERALL OR STEEL COMP 4340 OVERALL
PROPRIETARY CHARACTERISTICSPACS
MINIMUM TENSILE STRENGTH180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER1.000 INCHES
NONDEFINITIVE SPEC/STD DATA-1 REFERENCE NUMBER
SHANK UNTHREADED HOLE DIAMETER0.141 INCHES MINIMUM FIRST HOLE AND 0.151 INCHES MAXIMUM FIRST HOLE
SPECIFICATION/STANDARD DATA81205-69-42616 MANUFACTURERS SPECIFICATION
WIDTH BETWEEN FLATS1.427 INCHES MINIMUM AND 1.440 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIOND2-5000,F-1.1926 CAGE 81205 MFR REF 1ST TREATMENT RESPONSE SIDES OF HEAD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIOND2-5000,F-1.90 CAGE 81205 MFR REF 4TH TREATMENT RESPONSE FASTENER
SURFACE TREATMENTCADMIUM GRIP
SURFACE TREATMENTCADMIUM SIDES OF HEAD
SURFACE TREATMENTCADMIUM THREADS
SURFACE TREATMENTCADMIUM TOP OF HEAD
THREAD CLASS3A
THREAD DIRECTIONLEFT-HAND
THREAD LENGTH0.745 INCHES MINIMUM AND 0.795 INCHES MAXIMUM
THREAD QUANTITY PER INCH12
THREAD SERIES DESIGNATORUNF


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us