|
|
|
National Stock Number:
5306-01-502-5948
Federal Supply Class:
5306
National Item Identification Number:
015025948
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 147318 | 10138 | ASTRONAUTICS CORPORATION OF AMERICA |
|
Techincal Specification:
| SURFACE TREATMENT | PASSIVATE OVERALL AND OXIDE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.590 INCHES MINIMUM AND 0.600 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 32 | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A286 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | WIDTH BETWEEN FLATS | 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC 1ST TREATMENT RESPONSE OVERALL AND MIL-C-13924, CLASS 3 MIL SPEC 2ND TREATMENT RESPONSE OVERALL | | THREAD SERIES DESIGNATOR | UNJF | | COLOR | BLACK OVERALL | | FASTENER LENGTH | 1.705 INCHES MINIMUM AND 1.735 INCHES MAXIMUM | | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM | | GRIP LENGTH | 1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM | | HEAD HEIGHT | 0.095 INCHES MINIMUM AND 0.125 INCHES MAXIMUM | | HEAD STYLE | HEXAGON |
|
|