|
|
|
National Stock Number:
5306-01-502-9291
Federal Supply Class:
5306
National Item Identification Number:
015029291
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| HL62-10-11 | 06725 | SPS TECHNOLOGIES, LLC | | HL62-10-11 | 17446 | HUCK INTERNATIONAL, INC | | HL62-10-11 | 56878 | SPS TECHNOLOGIES, LLC | | HL62-10-11 | 73197 | HI-SHEAR CORPORATION | | HL62-10-11 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HL62-10-11 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 1.1566 INCHES MINIMUM AND 1.1587 INCHES MAXIMUM | | GRIP LENGTH | 0.688 INCHES NOMINAL | | GRIP DIAMETER | 0.302 INCHES MINIMUM AND 0.306 INCHES MAXIMUM | | HEAD HEIGHT | 0.0593 INCHES MINIMUM AND 0.0614 INCHES MAXIMUM | | HEAD DIAMETER | 0.4689 INCHES MINIMUM AND 0.4739 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-500 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | MINIMUM TENSILE STRENGTH | 5000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.3125 INCHES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE II,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.530 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 24 |
|
|