|
|
|
National Stock Number:
5306-01-506-3326
Federal Supply Class:
5306
National Item Identification Number:
015063326
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 5393072 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 6393072-8 | 31442 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 6393072-8 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| FASTENER LENGTH | 2.450 INCHES MINIMUM AND 2.470 INCHES MAXIMUM | | GRIP DIAMETER | 0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM | | GRIP LENGTH | 1.630 INCHES MINIMUM AND 1.650 INCHES MAXIMUM | | HEAD HEIGHT | 0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS5664 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | NICKEL ALLOY 718 OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | NOMINAL THREAD DIAMETER | 0.625 INCHES | | SPECIAL FEATURES | DATA IS EXPORT RESTRICTED;FINISH IS ALUMIZITE Z OR ZD | | WIDTH BETWEEN FLATS | 0.922 INCHES MINIMUM AND 0.938 INCHES MAXIMUM | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.820 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 11 | | THREAD SERIES DESIGNATOR | UNRC |
|
|